ive been workin on this thing for about month finally almost all the way put back together. heres the problem the new blaster i bought i took the head, piston all that off and put it on my other blasty. the exhaust on the new was stock so the head has the long bolts sticking out for the exhaust and i can seem to take the bolts out. there to long and wont hold my fmf up against the headi have a huge gap so i need to take those long bolts out so i can put the shorter ones in so i can actually ride plz help
in need of help fast
- Thread starter tcoop474
- Start date
They should be threaded all the way. Try new nuts. If that doesnt work, get youself some small spacers, or stack washers, to take up the space.
nope the stop kinda far back with the nut all the way tight the fmf is still nowehere near the head thats when i looked at the ones that cam out of the other one there not double threaded they just screw in so im guessing the guy that had b4 me had to put those in to hold the pipe against the head which means he got thoose long studs out somehow
You could have put two nuts on I e stud tightened together then use the inside one to remove the stud.
spray some pb on the studs, get a couple of nuts, put some locktite (threadlock) on the stud and on the inside of the nuts and let it sit for a day or two. then go out and see if u can undo the studs. ive used this on a couple of my rc trucks lol. maybe it would be a try.
