In need of an exhaust

[recruiter101st]

I just purchased my first ATV its an 03 Blaster with 26 hours on it. Very Clean. I picked it up for 700 bucks and have been riding it a ton.
I have purchased some Performance parts so far here is what I have coming.
uni-filter(I will remove air box lid) Bouysan(sp) reeds, Reed spacer, Jets, Fly wheel puller so I can pull the flywheel and DYI my own 4 degree advance timing. I think this is all I have ordered so far. I have run out of cash but I really need an exhaust. Does anyone have an exhaust setup they want to sell?

 

[blasterdad]

First of all, welcome!
Second, make sure you rejet after your mods.
Third, look around on ebay for a pipe, you should be able to find a deal there.

 

[89blasty]

dont get DG it sucks its only for sound gives you no more performance. go with fmf or something like that

 

[99LRDblaster]

I just purchased my first ATV its an 03 Blaster with 26 hours on it. Very Clean. I picked it up for 700 bucks and have been riding it a ton.
I have purchased some Performance parts so far here is what I have coming.
uni-filter(I will remove air box lid) Bouysan(sp) reeds, Reed spacer, Jets, Fly wheel puller so I can pull the flywheel and DYI my own 4 degree advance timing. I think this is all I have ordered so far. I have run out of cash but I really need an exhaust. Does anyone have an exhaust setup they want to sell?

Jets are not a performance part.

At any rate, just keep an eye on the For Sale section on the forum and for complete part outs by people and occasionally exhausts pop up. You can check Ebay and Craigslist as well. For a stock port map, the Toomey B1 is a pretty potent pipe in terms of power, but they all do well(except for DG). FMF, Pro Circuit, etc. are all solid pipes as well. Factory 7, Power Pros, Trinity, Graydon Proline are all the same pipe with different names. LRD pipes are typically more expensive and harder to find and work better with modded engines.

 

[recruiter101st]

Thanks so far guys! I am waiting on everything to get here before I start putting things on. I will do it all in one shot. I would like to get a pipe so I can knock it out and do my jetting.