if u want to keep ur swingarm bearings try this

[speedemon17]

u want to keep ur axle bearings try thisI:I i added a grease fitter

 

[gearhead04]

???? what does the picture have to do with swingarm bearings?

 

[sheeblast]

ya putting a grease zerk is so long ago.

 

[blaster01]

yup your late dude

 

[gearhead04]

axle bearings 8-| 8-|

 

[blaster01]

yea good point gearhead, THOSE ARE AXLE BEARINGS!!!!!!

 

[speedemon17]

my bad i did this and it should work pretty well

 

[Devilman910]

As long as the Axle carrier seal holds up you shoukd have to worry about greasing to much should you?

 

[Awk08]

it will keep water out of the housing but no grease gets into the bearings unless you pick and leave the inner seal off the bearing, the bearings have seals on both sides, picking a seal and packing with a good waterproof grease is my suggestion, they dont come with very much in them

 

[super noober]

i added a zerk fitting to my carrier also, its a good idea for sure. when i first got the quad i had a hell of a time getting teh axle out to change bearings but once i did i added the zerk and when i went to change my axle to the lonestar my stocker almost fell out because of being well greased. I:I I:I

 

[Devilman910]

Ok what size fitting did you use and what size drill bit did you use to drill the hole