M meangreen New Member Aug 24, 2009 196 3 0 Sep 15, 2009 #1 I have a used hot rods crank,and am wondering how to id it....stock-stroker ? Is there numbers that i am missing or what ?
I have a used hot rods crank,and am wondering how to id it....stock-stroker ? Is there numbers that i am missing or what ?
CHutzell New Member Jul 15, 2009 273 13 0 Sep 16, 2009 #2 take a vinier caliper and measure from the center of the big end pin to the center of the crank and mulitply that by 2,if your cases are not machined then its more then likely a stock stroke crank.
take a vinier caliper and measure from the center of the big end pin to the center of the crank and mulitply that by 2,if your cases are not machined then its more then likely a stock stroke crank.
M meangreen New Member Aug 24, 2009 196 3 0 Sep 16, 2009 #3 well,i got this crank in a box of parts so it is not installed. What would the stock measurement be ?
well,i got this crank in a box of parts so it is not installed. What would the stock measurement be ?
CHutzell New Member Jul 15, 2009 273 13 0 Sep 16, 2009 #4 stock would be 28.5mm x 2 would be 57mm stroke
