identify these parts, win a prize

[Awk08]

got a moose rebuild kit last week for my stock carb, and could not find these parts inside of it, anyone know what the hell these are and where they go, and the prize is some rep points, haha

 

[2kuik4muharemovic]

pilot jet maybe that spring goes on one of the adjustment screws

 

['blanshee'man]

hmm the first is a pilot jet i believe but the other two i have no idea. The o ring may be the seat for the inlet but im not even close to certain.

 

[yb200]

looks like the air screw.....o-ring on the screw then the sping and put it in the carb

 

[Awk08]

no the airscrew is in and had it's o ring on it, wheres the pilt screw/jet go, i cant see where???
no winner yet!!!!

 

[samolia]

the first is a pilot jet it goes in the bowl of the carb in a hole (just look in the holes untill you find it)
the oring looks like the one that goes around the float needle housing (that brass part that the needle goes in it can be removed with some pliers)
and the last looks like a spring that holds either the idle adjustment screw secure or the air/fuel screw one of the two.

do i win??

 

[Awk08]

well thats the first logical explanation that i've got as to where that damn pilot jet goes, and the float needle housing had it's oring on it, when i replaced it, i was startin to think that this kit could have been for a few different carbs, but the package says yfs 200?? i'll have to look for the thing in the bowl, i may have overlooked it, cause i just grabbed the carb itself, replacing and looking for parts, i'm headin to watch my "steelers" woop some ass, so tomorrow if that pilot is in the bowl, my man samolia gets him some rep points, good looking out bro

 

[meangreen]

haha,i got that same kit today,the spring goes on the pilot air screw,the "pilot jet" looking thing goes in the carb bowl in the biggest hole.If i remember right it was before my coffie so its hard to say
And the o-ring is for the choke slider.

 

[Cochise]

haha,i got that same kit today,the spring goes on the pilot air screw,the "pilot jet" looking thing goes in the carb bowl in the biggest hole.If i remember right it was before my coffie so its hard to say
And the o-ring is for the choke slider.

Choke plunger.

If the brass screw looking thing says 32.5 on it, its a pilot jet and goes right beside the main on the main carb body. Otherwise it could be the float bowl drain screw. If you look at the outside of the float bowl you will see where it goes. And the spring goes on the mixture screw (or air screw)

 

[meangreen]

scratch that !! maybe the o-ring goes around the main jet ? and yes,the pilot screw says 32.5 on it.But mine was the same as was in my carb bowl.

 

[stephen12091985]

is a pilot jet,choke oring and airscrew spring

 

[burnin'_oil_2001]

is a pilot jet,choke oring and airscrew spring

bingo! i was trying to respond earlier but my phone was too slow..

 

[samolia]

well thats the first logical explanation that i've got as to where that damn pilot jet goes, and the float needle housing had it's oring on it, when i replaced it, i was startin to think that this kit could have been for a few different carbs, but the package says yfs 200?? i'll have to look for the thing in the bowl, i may have overlooked it, cause i just grabbed the carb itself, replacing and looking for parts, i'm headin to watch my "steelers" woop some ass, so tomorrow if that pilot is in the bowl, my man samolia gets him some rep points, good looking out bro

im here to help man BTW my name is john