i need pics of full banshee brake setup i have a 2001 blaster and am buying a full banshee set up with pedal and everthing i just wanted to see how you guys fabed them on
thanks
thanks
i need pics of full banshee brake setup
- Thread starter kx80berger
- Start date
i have a bracket that makes the caliper bolt on you can weld to your carrier also bolt the brake on you will have to weld a tab on the back of the blaster stock brake peddle and to mount the master you will need some kind of clamp set up and a tab for the top hole. i can get you more close up pics of my peddle and clamp setup if this isnt enough hope it helps
bracket was bought in brake kit, it wouldnt be hard to make or get made i could get you measurements
heres a few pics on this thread i posted a few weeks ago, different caliper, but master cylinder is banshee
http://www.blasterforum.com/suspension-14/rear-hydros-19792/
http://www.blasterforum.com/suspension-14/rear-hydros-19792/
you can use an 03-06 right peg with pedal and you can mount the top hole of the master cylinder to where the heel guard bolts to the frame
i used the pedal off a tri-z i had to bend it a lil to get it out from under the the oil injection cover but it works great
i can tell ya ahead of time the banshee pedal wont work its totaly backwards from what you need an its too long
