I need help on my CARB, someone please help...

[bluwagun]

Can some one help me find the needle clip grove on my carb? I need to do an adjustment to the needle clip grove position.

 

[chris960]

You have to unscrew the top of your carb off. then pull out the round slide unhook it from the cable remove 2 screws then the needle will push out. be carefull not to loose the clip and white washers. Moving the clip up will lean out and down will richen. Also you need to have your main jet close before adjusting this needle. good luck it's not that hard.

 

[bluwagun]

What do you mean by making sure that my main jet is close?