I need help. My blaster won't start.

[yb200]

so you have spark.....and you have fuel right?

 

[04blasterNEWB]

any other ideas yb200?

 

[yb200]

check the reeds.. you know how to do that?

 

[04blasterNEWB]

i have spark and im not sure if i have fuel in there. i know there is fuel in the tank.

 

[04blasterNEWB]

i dont know how. but im pretty smart and good with engines. just not familiar with 2 strokes.

 

[yb200]

is the plug wet

 

[yb200]

to check the reeds undo the 2 hose clamps on the carb take the air boot off and take the carb out of the intake.....there are 4 bolts on the intake..take those off and the reeds are behind that take them out and see if any of the pedals are cracked or broke

 

[04blasterNEWB]

it seems to be wet. its not soaking but there is some gas or oil on the tip of the plug

 

[04blasterNEWB]

alright i'll try to check the reeds.

 

[04blasterNEWB]

i don't think i can get the carb off by just undoing those clamps. i think the oil injection is on top of it or something.

 

[yb200]

no thats the tors it will come off just wiggle it around

 

[falandys1002]

i gut the same problem bro haha i gut spark, compression, and gas/ pull it with a truck or another quad and pop it into gear for some reason that seems to work or try holding it at half to full throttle and kicking it

 

[04blasterNEWB]

well i got the reeds out and they look fine. no cracks or broken parts.

 

[blasterfreek30]

how does the compression feel on it?

 

[04blasterNEWB]

it feels pretty good. its still kind of tough to kick but not super hard.

 

[blasterfreek30]

did u disconnect the TOR yet

 

[04blasterNEWB]

no. do i need a kit for that?

 

[yb200]

no go to the link i posted up there ^^^

 

[04blasterNEWB]

i went to the link but i cant find that box mine looks completely different. mines an 04. does that make a difference on the location of it?