How much hp am I making, roughly?

[XBLASTERRACERX]

I am looking for just a rough estemate of how much hp my blaster is making? Also how much hp would a good port and polish add??
Mods:
uni air filter
removed air box lid
cpw 30mm carb
vforce3 reed cage
wesico pro-lite piston
milled head
full DMC exhaust
running on vp red fuel

 

[darealblaster]

its really impossible to tell how much hp you putting,id say 18hp,20hp? also all engines act different to the mods,because of the care you have given it and such. if you want big hp numbers get a 240 bb kit with P&P

 

[XBLASTERRACERX]

Did you mean 28 to 30 because the stock blaster is like 16hp?

 

[darealblaster]

sorry i was thinkin toehr stock numbers,but 28 to 30 is too much for those mods unless you have P&P, id say 24hp tops.

 

[TORKER]

Well, look at it this way. A stock motor may put down more power if parts are just thrown at it, you may even loose power, yep, that's right, loose power. On the other hand with the parts on your list you could have a very nice powerband, but, TUNNING IS EVERYTHING...A well tuned machine is incredibly nice to ride. To get real #'s, a dyno is your only option.
TORKER.

 

[BlasterJim5]

It's hard to say. All engines are different. Like posted before tuning is almost important if not more important than the parts being put on.

 

[4cfed]

a stock bore with a p& p can make more power than a 240 with a p&p if the 240 is tuned for sh*t... lots of time is in tuning... i had prob 4 hours into tuning/ jetting the stock blaster carb... and my sh*t was dead nuts on!!! hung with my buddys lt250r from a dig tell irun outta gear.... and mine prob was making simmaler power to yours

 

[xmous3yx]

mine has 24whp if it helps. blaster comes with 16hp to the flywheel or 12-13whp

 

[lassek]

12-13 hp ? You´re kidding right? It states everywhere 18-20 .. not 16... ?