honda civic motor swap

thanks 98, he said the tranny is a cable trans he baught the motor/trans seperatly, also said he used a integra shift lenkege... from what ive read the harness will connect except for the vtec, so the axles he is giving me will work in my car? he has it in a 92+ hatch?? any info on this swap is helpfull will his mounts work??
 
thanks 98, he said the tranny is a cable trans he baught the motor/trans seperatly, also said he used a integra shift lenkege... from what ive read the harness will connect except for the vtec, so the axles he is giving me will work in my car? he has it in a 92+ hatch?? any info on this swap is helpfull will his mounts work??

the axles and mount should work for you do you know what year integra he got the linkage from because 86 to 89 had a d-series in them all the rest are b the ecu out of a 92+ hatch will not plug in with out an adapter harness the plugs are different and if he has that trans in a 92+ hatch than it should be a hydro trans unless he did some stupid sh*t to rig up the slave cylinder to work on the cable trans which would be completly retated dudes setup sounds kinda shady were are you from and how much does he want for the swap
 
he said he had an hydro to cable adapter because the tranny is cable. and the lenkege/mounts/axles are all from a 94+ integra i said that in a previuse messege...lol and its a done deal it will be here on sunday, im giving him my blaster for it wich i have around 800 into and i still keep reading and alot of honda forums say that i use the civics harness and it will plug into the motor except for the vtec and they gave me a diagram of how to wire it up... so will the integra mounts he has fit? what distributor will i need ive also been told my d16 dizzy will work but only 1 bolt lines up... help??