HELPPPPP!!!!!!

[rad-blaster230]

ok my blaster is runing weird once in a wile

when it is nice and warmed up and i am going full bore in 4th it kinda bogs out but when i stop and go again it dosn't do it again

and when i rev it up it takes a little bit to come back down

it is not an air leak i checked twice

maby its to rich/lean?

help plz!!!!

 

[piezzi]

If it takes a while for the rpm's to come down then it's running too lean.

 

[rad-blaster230]

im gona check the plug after it cools of for about 20min outside and i will let u know

 

[rad-blaster230]

im gona check the plug after it cools of for about 20min outside and i will let u know

it was lean (kinda white) so i went to go get a bigger jet, o sh!t i have the biggest one in it

so i ended up having to move the needle 1 notch down

 

[ron89]

it was lean (kinda white) so i went to go get a bigger jet, o sh!t i have the biggest one in it

so i ended up having to move the needle 1 notch down

the needle clip is for low end u need too up your main jet for top end ..