help

[nonpoint86]

all right I started to split this case and everything has been going smooth untill now plus not having the tools for this its been easy so far but I cant get this damn nut on the big right gear to break loose and also I have a couple screws on the otherside and one on this right side that is stripped any ideas I have pretty much tried everything i wonder if a impact will get that f*cker to break loose...lol shoot me back some comments

 

[CC&Fabb]

Impact guns can get anything. Thats how i got mine off. i didnt even try to use hand tool when i took mine off to replace the crank seal.

 

[nonpoint86]

kewl i try that tomorrow then, this is just a project bottem end anyways so if i cant get it its no big deal just tinkering with it to know my motor better figured it would be a good way

 

[Busted Warrior]

yea def an impact will get that off. And as for the stripped screw I took a chisel and slowly tapped at it and it came loose. I found that if you take a #2 phillips screwdriver and file the tip of it down it fits better in the screw head.

 

[flyers42091]

yep impact, but make sure you have your crank held down somehow or its gonna flop all over the place.

 

[bkg479]

it looks lke u got a little bit of rust goin on, make sure u clean that up

 

[89custom]

impact screwdrivers do wonders.

 

[nonpoint86]

man i put that impact on there today and it stripped that f*cking nut into a damn circle then i beat a smaller socket on there...same exact thing so then I cut the nut head off and come to fine out this is a solid long nut head or sumthin so then I took a drill bit for metal and started in at it and still no luck to tell you the truth I think I am f*cked here.... I cannot get it to come loose or am I doing somthing wrong...lol all i am wanting is the left side of this case!!!

 

[89custom]

lol not sure, sounds like you butt f*cked yourself, but it may be a left hand thread. dont remeber if it is or not.

 

[Busted Warrior]

No its a regular thread. Lefty loosey. When I took an impact to mine it came right off. Get one of those nut extractor kits. Heat up the nut a little and then try it with the extractor on the impact. Pics are good too.:-D