Help With Throttle

[Chad Moore]

I changed my main jet and now my throttle is very loose. Can anyone tell me how to fix this problem ?

 

[Fast6hand]

You got something hung up or different when you put the cap back on. Do you have a tors eliminator kit on it or the brick on top?

 

[Chad Moore]

I have the brick on top

You got something hung up or different when you put the cap back on. Do you have a tors eliminator kit on it or the brick on top?

 

[Fast6hand]

Check the cable to make sure it's not hung up on top. You should have a bit of play though.

 

[Chad Moore]

Check the cable to make sure it's not hung up on top. You should have a bit of play though.

Ok will I have to remove it again ?

 

[Fast6hand]

Ok will I have to remove it again ?

No just inspect it. If nothing then remove the cap. It could be the spring.

 

[Chad Moore]

I went and inspected it didnt see anything hung up on top. What else could I do ?

 

[Fast6hand]

I went and inspected it didnt see anything hung up on top. What else could I do ?

Try adjusting it at throttle.

 

[Chad Moore]

How ? And when I take the cap off it's not loose anymore why is this ?

Try adjusting it at throttle.

 

[Fast6hand]

Something is getting caught or something preventing the spring to have tension on the slide. That's why when it's off the spring has full tension and it feels fine.

 

[Chad Moore]

What could it be ?

Something is getting caught or something preventing the spring to have tension on the slide. That's why when it's off the spring has full tension and it feels fine.

 

[Fast6hand]

What could it be ?

Your slide could be in the wrong way. There's a groove on the slide, and a little brass nub inside the carb. The nub should sit inside the groove.

 

[Chad Moore]

Thanks that was the problem

Your slide could be in the wrong way. There's a groove on the slide, and a little brass nub inside the carb. The nub should sit inside the groove.

 

[Fast6hand]

Sweet