So i just rebuilt the top end on my 99 blaster. It hadn't ran in years and it was just sitting around the garage. So i did the rebuild and cleaned the carb out. For some reason I am getting gas/oil mixture i believe spitting out the air intake side of the carb. Any ideas why this maybe happening? I was thinking maybe my reeds aren't opening all the way or something. Maybe I'm running way to rich but I have no clue what the cause is. Anyone???
Help with my carb...
- Thread starter D_Rok
- Start date
Ill pull the reeds out right now and let you know if they are broke, but I'm pretty sure they were just replaced like a year ago. I used to have aftermarket reeds but the dealer for some reason took them out and put oem ones back in...i was a little fired from that
Rule 1: Never take it to a dealer if your expecting them to put in aftermarket parts.
I might sound like a dick but im just tellin' ya. lol
I might sound like a dick but im just tellin' ya. lol
So it my reeds were installed the wrong way, not by me but by a dealer, so i fixed them and put them on right. I didnt say i was expecting the dealer to put after market parts in, what i said was they took them out so before you don't want to sound like a dick read the post.... Anyway it still sends like a find mist out the air intake of the carb so i still dont understand what the problem is.
As a matter a fact it isn't, the carb stopped spitting out the back but now when im riding it and get into higher rpm's it basically bogs out on me i cant explain it and i dont know what the hell is wrong with it.... it is pissing me off so bad that i went out and got a yz 125 today LOL I:I
No its not going to solve the problem... And yes i do have the air box cover on i was going to start with one thing at a time today. like take off the air filter and try that maybe check the spark plug gap even though i dont know if that would cause this problem. Im also going to check fuel level in the bowl while its off and running. any other suggestions?
Ok so i had it running great by adjusting the pilot air screw and i went for a ride. I was out for maybe an hour ripping around and then it starting bogging out really bad again. i barely made it back home it was bogging so bad. i dont get what the problem is now. I was thinking maybe the autolube system is not working right so i dumped all my oil and cleared all the lines and still nothing. suggestions?X(
Similar threads
