help with idle

[brandoz28]

yes it could. otherwise you could've ripped the intake boot while putting it back together.

 

[stephen12091985]

yep my carb boot riped on mine from tightening the clamp to tight

 

[stephen12091985]

here is the idle screw kit NEW MOTION PRO CARBURETOR CARB IDLE KIT BLASTER 200 : eBay Motors (item 320515375886 end time May-10-10 12:20:45 PDT)

 

[fruehjames]

thanks again for the help guys im gonna check over the intake boot and make sure it is tightened all the way down I think this might be where my problem is coming from cause I dont believe the trottle is sticking but how can I double check the throttle isnt sticking?

 

[brandoz28]

the most fool proof way is take the airbox side boot off and look at the slide

 

[fruehjames]

and what should i look for when looking at the slide from the intake opening? Is it possible the throttle could be sticking inside the carb but seems to be working fine when testing at the thumb throttle?

 

[brandoz28]

its not real likely but it is possible

 

[fruehjames]

thanks for the help man gonna mess with it in the morning and hopefully get it figured out ill let you guys know how it goes