Help me out a bit

[blasterdude14]

First off, you are old enough. Second if you say you have no money to build a simple leakdown test, how do you plan on buying new crank seals. Do yourself a favor, save some money, build a leakdown tester and find out what your problem is. There is absolutely no point in ripping apart your motor, when there could be nothing wrong with it.

down here have to be 16 for a job, how can i save money if i dont have a way of getting any, parents dont even give me an allowance. I can clearly tell something is wrong if its shooting out that much smoke

 

[brandoz28]

and you need a leakdown tester to verify where the problem is, or if its not just burning off extra oil from when it was assembled. how long has it run?

 

[blasterdude14]

I know for sure its burninng the transmission oil, I can clearly tell just by looking at the sight glass the tranny oil is almost gone and I had just changed the oil before starting it today.

Also had would a leakdown test help me check something in the bottom end when you can't even see the seals unless you remove the stator and clutch cover.