Help changing jets!

ecurbd02

New Member
May 22, 2008
94
1
0
Alright i got my LRD exhaust and obviously i need new jets but im new at this and im kinda confused on how to go about the carb part, do i need to take it off or do i just need to flip it upside down? and how do i go about doing it?
thanx for any help
 
depends if your changing the main jet or the needle clip position. main jet all you really have to do is turn the carb on its side and take the float bowl off, but if ur going to change the needle clip position i would take the carb out. just easier to access cuz your working from the top
 
depends if your changing the main jet or the needle clip position. main jet all you really have to do is turn the carb on its side and take the float bowl off, but if ur going to change the needle clip position i would take the carb out. just easier to access cuz your working from the top

well said!!
 
i gotta change the main jet for sure but im not sure about the needle, but how do i go about getting the carb off because of the carb switch on top? can i remove the carb switch w/o nething fgalling out?
 
how do you get to the jet needle? i have the carb off and now the needle is covered by that sleeve and spring setup so how do i get to it?
 
thats a pain.... compress the spring up to the top as much as possible and hold it there with one hand. there is a little clip down in there you have to take out with a pair of needle nosed pliers or something, then i if i remember correctly you have to push down on the cable and slide it out thru the notch. be patient. it is a pain, and the first time is always the hardest lol.