Hi everyone. I am starting a blaster rebuild, and need some help with a good starting point on getting a oko 30 mm.
Mods are below
Vforce v3
Spacer
Oko 30mm carb
Fmf fatty
Fmf powercore 2
Project blaster open air intake
With these parts what is a good starting point? The bike was in pieces when I got it so I've never had it running.
I have done a compression and leak down test so it should be a good bike once it's back together.
Also could someone point me to a good place for buying a 28mm keihin. Sounds like a lot of people with issues getting the oko dialed in or working so if I can't easily get it running g I'd like to go with a authentic carb
Are the 28 mm carbs easier to setup ?
Mods are below
Vforce v3
Spacer
Oko 30mm carb
Fmf fatty
Fmf powercore 2
Project blaster open air intake
With these parts what is a good starting point? The bike was in pieces when I got it so I've never had it running.
I have done a compression and leak down test so it should be a good bike once it's back together.
Also could someone point me to a good place for buying a 28mm keihin. Sounds like a lot of people with issues getting the oko dialed in or working so if I can't easily get it running g I'd like to go with a authentic carb
Are the 28 mm carbs easier to setup ?
