Would I be able to run a mix fuel of 93 octane and C16 races full in even parts? running either 32:1 or 40:1 oil ratio.
Would I be able to run a mix fuel of 93 octane and C16 races full in even parts? running either 32:1 or 40:1 oil ratio.
my buddy has been telling me to mix some fuel with C16 to reduce carbon build up. Hes running a 250r full c16 race fuel. mixing both would give me around ~100 octane.
ok I'll just stick with 93 octane then and save some cash.
We use regular gas and Maxima Castor Oil. Mix it 32 to 1 and you should be good. No need for anything crazy, it's a blaster after all. Sometimes we even use Shell Nautilus Oil and it works fine. I race in the weekends with my Blaster and no failures so far.
![]()
![]()
Castor 927 all the way! Lol
That's what I have used the blaster intire life.
Like blaaster said tho castor and regular 2 cycle don't mix. I've used maxima super m in a pinch works just as well, I just live by the of it isn't broke don't fix it Moto, inless of course to upgrade. I:I
Anyways when I switched over I empties the remainder of the tank and cracked the carb drain screw and refueled completely with maxima super m!
Good move, but there is quite a large amount of residual oil in the crankcase.
Castor and mineral oil do not mix.
Castor and semi synthetic should not be mixed.
Castor and fully synthetic will mix but not recommended.
I have progressed to Castrol R30 because of the unavailability of 927.
For maximum protection and power I mix at 25:1.