FMS Fatty spout gasket?

[randy2112]

I just installed my new FMS Fatty Gold Series pipe today and There isn't a gasket for the spout to pipe slip joint... I Figured it must self seal but it doesn't, there is a deffinent leak. Can someone tell me how to fix it?
Thanks
I am leaving in the morning to drive down to Cow Mountain so I hope to get a ansewr quick.

 

[lonlywolf]

radiator hose and clamps will do the job cheap

 

[randy2112]

I am talking about the joint at the Cylinder head... The pipe is all the way up to the flange that bolts to the head.
Can I just put some High temp RTV in there and let it set overnight?

 

[lonlywolf]

i dont know about that mine leaks a little bit there to don't seem to bother the anything but anybody else have a idea

 

[Jay]

mine leaks at that spot 2 the only problem i have had in deep water it gets in a little an i can hear it in the head pipe it goes away,i think they make some type of high temp sealant just for that. dont bother me though urs must leak bad

 

[randy2112]

Yeah, it is pretty bad... I think I will just use some high temp RTV and see what happens.
Thanks.

 

[Jay]

Yeah, it is pretty bad... I think I will just use some high temp RTV and see what happens.
Thanks.

maybe u have the wrong flange,but anyway let me know how the rtv holds up

 

[Jay]

Yeah, it is pretty bad... I think I will just use some high temp RTV and see what happens.
Thanks.

mybe u have the wrong flange,anyway let me know how the rtv holds up.

 

[randy2112]

It was the one that came with the pipe.
I think I will just use a band clamp.
We rode it on our trip It ran just fine. it has some oil residue on the pipe from the leak though.

 

[musselman]

My fatty leaked like crazy there and I just put some high temp RTV on it and now it doesn't leak at all. Make sure you put lots on because the gap around the flange is pretty big, well it was on mine.

 

[randy2112]

Thanks, If I cant find a band clamp I will do that.

 

[ruthless_one3k]

sorry to break it to ya but the band clamp don't help. I had to use High temp rtv around the flange to cylinder joint and the flange to pipe joint.

 

[ClimbAnyHill]

High temp RTV at the exhaust port works fine.. I use it and never leaks. Apply a think coat on the cylinder & thin coat on the flange, bolt it together when rtv reaches a sticky dry.

 

[randy2112]

RTV it is then.
Thanks