FMF exhaust gasket

[bbeers]

Just curious if there is a gasket that is supposed to go between the pipe and head? I have an FMF Fatty pipe and when I took it off there's no gasket. I looked on FMF's site and didn't see one. Couldn't find one on the eBay searches I did either.

 

[woodwardspecialties]

nope... no gasket... you use the OEM rubber boot with clamps.. that works great to seal the leaks.

 

[blaster20001]

if your talkin about on the jug theres a metal seal that fits right in the jug flush

 

[pittboss45]

use the round gasket and Permatex Ultra Copper between the flange and the cylinder.

 

[bbeers]

i guess the round gasket that's supposed to be there is gone. any ideas where i could pick this up at?

 

[bbeers]

nope... no gasket... you use the OEM rubber boot with clamps.. that works great to seal the leaks.

What rubber boot? Between where the pipe and silencer connect?

 

[woodwardspecialties]

What rubber boot? Between where the pipe and silencer connect?

my bad... i read fast... i thought you were talking about the pipe and silencer joint.


at the cylinder... i would get a new OEM gasket... and use permatex gold

 

[bbeers]

my bad... i read fast... i thought you were talking about the pipe and silencer joint.


at the cylinder... i would get a new OEM gasket... and use permatex gold

Do you know where to get the gasket? I don't see it on the FMF site?

Also, is there supposed to be a rubber hose to connect the pipe to the silencer? Where can I get this or just make one?