like the title says, i fixed the tors problem i had and got her running, ive been working on getting the lowend jettedright..hers a vid of her running let me know what you think
Last edited by a moderator:
fixed tors prob and got her running
- Thread starter kissiimack
- Start date
no i just replaced the tors with another tors i had from a carb that i had sitting around..took about 45 mins tops
if you take the tros off you have to shave and drill the carb to put a new idle screw in and i didnt want to do that..since i had an extra tors laying around i figured why not..i put the vid up to get some feedback on whether she was idling right or not..i read the thread about jetting the lower end and i tried it..let know if you guy think it sounds right
i had the dors eliminator kit on my banshee and loved it. took 15 min to drill the carbs and s much more reliable.
josh
josh
why dont ya just disconnect the TOR "wiring" and leave the stock idle adjustment in the box.....then there is no drilling of a new idle screw
i havent done the tors because im not sure or what to disconnect and cut on 03+ blasters..there is a really good write up for older blasters on how to remove the tors but nothing on the newer ones..i dont want to f**k sh*t up by cutting the wrong wires..ya know
Last edited:
