Final thoughts needed

[76ranger]

Ok here's what i got. I've got a 240 big bore kit with +3mm stroker crank with trail porting, a ricky stator, lighteed flywheel, V force 3 reeds, Keihin 35mm air striker carb, Fmf exhaust for now. My question is anyone running close to this setup if so, What jets are you running in carb (i'm looking for a good starting point) Second what kind of gearing would be a good choice on this bike( I mainly ride on wooded trails) with some flat straight line runs here and there. And any recommendations on the exhaust pipe? Stay with what i have? or is there a better pipe out there. Thanks David

 

[HOBBYHORSE]

WHERE DO YOU LIVE? I'M RUNNING #42 & #180. WITH YOUR SETUP THE #180
WILL PROLLY BE TOO MUCH. THE FMF IS KILLING YOU, LRD, F7, WOULD BE MUCH BETTER. STOCK GEARING WILL BE PLENTY FOR THAT 244.

 

[76ranger]

Im located in Solon ohio, Its about 1/2 hr south of Cleveland. Its still on the bench, just finishing putting it together. Looking for a good spot to start on the jets.