extended swingarms

Troyaughenbaugh

New Member
Feb 8, 2009
66
0
0
wrightsville,pa
I will be building a few NEW extended swingarms. I am posting this to see if anyone is interested in purchasing one. I will have pics of the swingarm off the blaster and pics of it installed on the blaster. I was hoping to get $185/swingarm and it would be the actual shipping cost to your door. You can contact me through my member page or on this thread. Thank you. They will be availabe in +3" on the first couple.
 
1 x 2 x .12" a36 rectangular tubing. 13/4" round tubing .12" wall for the bracing of the shock mount and front support. 3/16" or 1/4" flat steel for the bearing carrier connection. I have to measure the stock I.D. of the swingarm pivot tubing to see if I have to ream or if it is a produced size for the swingarm bearings. And I may gusset the tubing that the shock mount attaches to if I think it will be a weak spot.
 
I'd like to see one finished also.It's a tough call +3 and +4 are the most common.I have one of each and both are good.
 
hi, what kind of metal do u use? regular steel/iron or carbonated steel? aluminium? etc...?
i just ask to know, im to far to buy one of those.... :(

thx anyway and break a leg on the new bussines
 
ill be watching this as well, gotta get them pics up asap. sounds good so far,

man lotta competition starting to come up out of nowhere for these custom fabricated swingarms.
 
i jumped in, talked to troy last week, he's building me a +3 with a custom length shock mount to accomodate the trx250r shock,
as it sat on my sons bike with +4 swinger, it sat too high, i moved it to the still existing stock mount and it sat too low, so i gave him the measurement i wanted, half way between the 2,
pics to come, but i'm sure he'll post some also when complete