extended swingarms

[Troyaughenbaugh]

I will be building a few NEW extended swingarms. I am posting this to see if anyone is interested in purchasing one. I will have pics of the swingarm off the blaster and pics of it installed on the blaster. I was hoping to get $185/swingarm and it would be the actual shipping cost to your door. You can contact me through my member page or on this thread. Thank you. They will be availabe in +3" on the first couple.

 

[Troyaughenbaugh]

I forgot to tell you guys I have been a certified welder/fabricator for 13 yrs. Sorry bout that. I definitely would stand behind my work and welds also.

 

[little3mil]

let see some pics bro if there clean im interested

 

[Troyaughenbaugh]

No problem. I just got some of the metal in today.

 

[Brute71]

what are you using in regards for material?

 

[Troyaughenbaugh]

1 x 2 x .12" a36 rectangular tubing. 13/4" round tubing .12" wall for the bracing of the shock mount and front support. 3/16" or 1/4" flat steel for the bearing carrier connection. I have to measure the stock I.D. of the swingarm pivot tubing to see if I have to ream or if it is a produced size for the swingarm bearings. And I may gusset the tubing that the shock mount attaches to if I think it will be a weak spot.

 

[Troyaughenbaugh]

Will be welded with .035" mig solid core wire and using 75/25 gas mix for shielding.

 

[Troyaughenbaugh]

If there is a bigger demand for a +4" swingarm please tell me now. Thank you.

 

[DirtDiggler]

+4 is more desirable , I'd be interested

 

[DUALSTROKE]

I'd like to see one finished also.It's a tough call +3 and +4 are the most common.I have one of each and both are good.

 

[Charles14]

hi, what kind of metal do u use? regular steel/iron or carbonated steel? aluminium? etc...?
i just ask to know, im to far to buy one of those....

thx anyway and break a leg on the new bussines

 

[Troyaughenbaugh]

I posted what type of material I am using.

 

[Iconic]

Any pics of these yet by chance?

 

[Troyaughenbaugh]

got all the metal except for the flat plate for the carrier mount. I am making the jig for the swingarms awhile while I wait.

 

[jjj_85]

I might be interested in a plus 4 also. Keep us posted!

 

[xjma]

I may be interested in +4, Got any pics?

 

[Mborso1029]

ill be watching this as well, gotta get them pics up asap. sounds good so far,

man lotta competition starting to come up out of nowhere for these custom fabricated swingarms.

 

[Awk08]

i jumped in, talked to troy last week, he's building me a +3 with a custom length shock mount to accomodate the trx250r shock,
as it sat on my sons bike with +4 swinger, it sat too high, i moved it to the still existing stock mount and it sat too low, so i gave him the measurement i wanted, half way between the 2,
pics to come, but i'm sure he'll post some also when complete