Extended swing arm...

[blasterboy2001]

How long of a chain/rear brake cable do I need for a +3" extended swing arm?

 

[fmxr47]

6" longer chain

 

[pittboss45]

I would get a chain at least 110 links long then install it on the bike, mark it then cut where needed. never count the links on the old one due to the stretch.

 

[fmxr47]

you should be able to make the brake cable have a moredirect route and free up some slac

 

[blasterboy2001]

you should be able to make the brake cable have a moredirect route and free up some slac

I already removed the parking brake assembly, and i can't really see how the piece is going to fit...

 

[fmxr47]

run the cable outside the frame stright from the pedal to the rotor, and zip tie the slac to the swinger

 

[blasterboy2001]

run the cable outside the frame stright from the pedal to the rotor, and zip tie the slac to the swinger

Thanks for the info, but i already ordered an extended brake cable. I also ordered the Blaster +3" swing arm chrome finish... I will write a review on this after I install it and thrash about on it.I:I

link: eBay Motors: +3"or +4" Yamaha BLASTER swingarm yfs200 atv swing arm (item 180228634640 end time Apr-09-08 05:17:45 PDT)