Everything for sale

[yamaha28]

Not my racing quad part out but everything else....here goes the list.
These prices do not include shipping, let me know what you want and I will give you a total price with shipping depending on where you are.
More stuff for sale coming soon!

Front Fast Trekker tires on stock rims. They have decent tread, probably around 50% or so. Rims are pretty beat up but they hold air, black paint on the valve side and silver on the other side.
$30

Dunlop 9 inch rear tires on polished warrior rims. The tread on the tires are not great but they will do in a pinch. The rims are in excellent condition though! These just come with the rims and tires, you will need banshee or warrior hubs to bolt them onto.
$50

Ignition with key, wires are they and fine, works good
$15

 

[yamaha28]

Rear Maxxas 4-Snow tires, they are in mint condition, never been used before. You can tell because they still have the little rubber fingers and the middle of the tire still has the excess rubber from the factory. They are mounted on warrior rims, I will include warrior hubs so they will bolt right up to your blaster. The rims are in excellent condition with no rust or dents of any kind. I will even include the spacers that you see in the pictures.
$200

Front-Max front tires that fit on stock blaster rims, these have very good tread, about 95%. They are in very good condition and are ready to install and go.
$50

 

[yamaha28]

Stock Front bumper, it is bent like the picture shows, just painted black and looks nice.
$5

Stock swinger off the yellow frame. Works well, don't know much about it.
$30
Stock rear shock
Free, you pay shipping

Foot pegs, they have surface rust but nothing deep, they are straight and not dented.
$5 each

Steering stem, straight, no rust, works well.
$15

Skid plates
Free, pay shipping

Front bumper, looks pretty straight
$15

 

[yamaha28]

Yellow frame:
Free, you pay shipping if you dare to spend that much. I will cut sections off if you only need part of it

Black frame:
Same as above, this one has no motor mounts

Full front end system, comes with a-arms, tie rods, spindles, hubs, brake lines, wheel spacers, shocks, shock covers, everything you need to bolt on and go
$50 each side

 

[yamaha28]

Brake disk, still lots of life left, bolts right up
$5

Ported Cylinder, unknown porting but it looks similar compared to Kens, I measured the bore at 66.65mm, right inbetween 66.5 and 66.75 piston. Just needs to be bored and then ready to go.
$175

 

[yamaha28]

Stock handlebars, three pairs, all straight and good to go. Here is a pic of one, you get the picture lol
$10 each

Top a-arms, good to bolt on and go
$20 for both

Bottom a-arms, two sets, set to go, other set is yellow
$20 each set

 

[blasterdemon7]

Where's the white race hood?lol.

 

[yamaha28]

Stock handlebars, three pairs, all straight and good to go. Here is a pic of one, you get the picture lol
$10 each

Top a-arms, good to bolt on and go
$20 for both

Bottom a-arms, two sets, set to go, other set is yellow (not shown)
$20 each set

Front brake perch and lever, works fine
$5

Another front brake perch and lever, works fine
$5

Foot peg, peg is bent, brake petal is fine
$5

Front brake line and splitter, good condition
$5

Front end assembly, has everything to bolt right up except tie rods, I may be able to find some to go along with it, everything is in good condition
$25 each side

 

[blasterdemon7]

Dibs on the skid plate. Awk may want it.

 

[yamaha28]

More!
Works Ultracross rear shock, here is the person I bought it from, I never mounted it up because I am using a different shock. He has details on his thread:
http://www.blasterforum.com/sale-18/works-ultracross-rear-shock-46208/
$175

Thumb throttle, works great, lots of tors wire still on it.
$20

Stock rear shock without cover
Free, you pay shipping

Clutch lever and perch, just painted black, works fine, little loosey goosey but I think with the right bolt it should be fine
Free, you pay shipping

 

[Awk08]

Dibs on the skid plate. Awk may want it.

good lookin out BD7

brake pedal from pegs and skidplate sold !!!!

awk now has 4 good swinger skids for this years assualt !!!! LOL

 

[yamaha28]

good lookin out BD7

brake pedal from pegs and skidplate sold !!!!

awk now has 4 good swinger skids for this years assualt !!!! LOL

alright fine, keep posting, keeps my ad up there I guess. I have two more skids for whoever wants them, just pay shipping

 

[blasty 95]

U got any pics of the other skids?

 

[yamaha28]

U got any pics of the other skids?

coming up in a few minutes, got a lot of other stuff to post up still

 

[Quadrider10]

damn man! lot of stufff! all ya need is an engine, and u can buld an entire bike lol

 

[yamaha28]

Itmes moved to the first page...

 

[yamaha28]

More items moved to the first page...

 

[blasty 95]

Does the front tires have any holes still hold air good?

 

[yamaha28]

These items moved to first page too....

 

[yamaha28]

Everything moved to first page...