Engine/Exhaust Stem

[Kwikness]

i was having the hardest time threading on one of the bolts on the engine/exhaust stem that the header bolts onto, when I realize its because the stem is broken off. I can get a bolt threaded on about 3/4 of the way, but that is all.

is this something I can repair?

 

[mr_3_0_5]

those studs can be replaced. just unscrew it.

 

[Surfrjag]

you may need pb blaster and drill it and ez out it. or since you can get a bolt 3/4 of the way in, use washers under the nut to take up the space.

 

[Kwikness]

you may need pb blaster and drill it and ez out it. or since you can get a bolt 3/4 of the way in, use washers under the nut to take up the space.

The bolt is in fine, the end is just broken off. If i can order a new one, that will be fantastic.

 

[Surfrjag]

you may be able to find one at the auto parts store. its the stud thats threaded on both sides right? its not broken inside the engine?
OEM Parts Yamaha BLASTER (YFS200L) 1999 EXHAUST - Cheap Cycle Parts
#7 in the diagram

 

[Kwikness]

no, i can still get a nut on to hold the header to the engine, but only about 3/4 of the way. I'll call around and see what I can get.