Hey guys, i recently took the P.O.S. cable brake off the back of my blaster to install probably the best and cheapest hydro brake setup on it for reliability and stopping power.
I used a used Wilwood race caliper thats usually on the front of a big block modified stock car, and a standard master cylinder that is used for many different applications .. total cost lesss than $100 if you pick them up used. Total fab time abuot 2 hours, and bingo you have an amazing rear brake caliper!
I must say it works absolutely amazingI:I
I used a used Wilwood race caliper thats usually on the front of a big block modified stock car, and a standard master cylinder that is used for many different applications .. total cost lesss than $100 if you pick them up used. Total fab time abuot 2 hours, and bingo you have an amazing rear brake caliper!
I must say it works absolutely amazingI:I
![0219121242a.jpg](/proxy.php?image=http%3A%2F%2Fi197.photobucket.com%2Falbums%2Faa297%2Ftrapper1306%2F0219121242a.jpg&hash=6b5b30cb527fcb98f485b04b86b749c6)
![0219121243.jpg](/proxy.php?image=http%3A%2F%2Fi197.photobucket.com%2Falbums%2Faa297%2Ftrapper1306%2F0219121243.jpg&hash=bd2576046837e1f88249130b057f8d33)