did something stupid

[blasterdude14]

well i was taking the motor out and i unbolted the swingarm and it collapsed and the oil jug fell straight onto the sproket and put a hole in it so while not thinking i cut the injection wires connected to the jug will this screw up the electrical system because if it did the im screwed because i barely have enough money to rebuild the motor

 

[Ready2rev]

just wire em back together. id pre mix anyways you dont want that oil pump failing on a fresh rebuild.

 

[blasterdude14]

just wire em back together. id pre mix anyways you dont want that oil pump failing on a fresh rebuild.

well i have been premixing before the top end blew and i threw the wires away before thinking about it and the trash collecter already came and took the trash so am i screwed?

 

[Ready2rev]

you wont need those wires anyways if your premixing. you should be fine...

 

[blasterdude14]

you wont need those wires anyways if your premixing. you should be fine...

ok because somebody told me that when they took the wires off they had no spark at all and couldnt start it but when they wired it back up it worked fine so im worried about this. hopefully i will be fine though

 

[zraffz]

I don't know how much of a wiring harness a Blaster has (mine I got gutted for the Gixxer swap) but if you have problems with the quad cause of that message me and I'll try to find a diagram of the harness and tell you how to fix it.

 

[blasterdude14]

I don't know how much of a wiring harness a Blaster has (mine I got gutted for the Gixxer swap) but if you have problems with the quad cause of that message me and I'll try to find a diagram of the harness and tell you how to fix it.

cool thanks
stupid 15

 

[liljatownboy]

um have you tried to start it?

 

[blasterdude14]

um have you tried to start it?

nope couldnt start it if i tried i was taking the motor out to get ready to rebuild