desperately need extremely hard to find bold m7 with 0.75 threads

[Outlawed Genetics]

as the title states im in desperate need of a m7 bolt with 0.75 threads.

sent my bottom end off to have a 3mm crank, new clutch, and to have a striped clutch cover bolt hole fixed 3-4 mos ago. the it was made to be used with a m6 bolt with 0.75 threads but neither me or the person fixing it can find that bolt ANYWHERE this bolt is the only thing holding back the project. the crank and clutch were done forever but we just cant find this bolt.

now i should be getting a 240 ported by flotek and matched to a 3mm crank and a 34mm carb in a week or so and would really love to find this bolt so i can get the bottom end back and get er all put togather. my 04 is nice but the 94 in my sig is my baby and she's laying in peices crying to be beat.

 

[Awk08]

i got a hardware store here that has not let me down yet for any metric bolt, i'll check it out for ya, this is for the clutch cover right ??
gimme a length too, cause most of these are stainless steel and are a biotch to cut

 

[Outlawed Genetics]

good news found a place with the bolt. thanks for the offor man. i should have the bottom end back ready to run in a week with some new stuff to add to my sig

going on in a week
3mm crank
4deg timing advance
flotek ported 240 matched for the crank
mikuni vm 34mm carb
vito's high performance clutch

lol maybe i should get a parachute for the back ahahah

 

[Awk08]

cool, good luck with the rest of the build