Ill be getting a new pipe soon and i need to make up my mind on either a CT or a Toomey, the pipe will be going on a .40 bored blaster, please dont talk about other pipes i only want to read your opinions on the CT or Toomey.
CT or Toomey?
- Thread starter yamaha_blaster03
- Start date
with just those mods toomey is way better..toomey is the best for stock engines..but once you get mods then go with ct
well it has a little porting so.. idk and it has a wiseco piston and a got rods crank
Last edited:
Ct is midrange at adds all around power to the entire curve. Toomey is a top end oriented pipe. I love my f7/ct It was a HUGE improvement and I dont have even tons of engine mods, but no other pipes to compare it to. Considering the ct/trinity/f7/phantom/CT/power pros are all the same pipe. Id say its rather popular if they sell it under 5 names.
ok so.. a toomey would be better for motocross? because ill be doing that in the summer but i also ice race in the winter so a ct would be best for ice racing because its more for top-end?
not much in low i usally am in about 2nd to 4th on tracks but in mid it great and top i rarely ever get to 5th,tracks around here are more tight, but in drags the top end its not the best but its good you will notice it though. my blaster runs great at millvile and hurricane hills it seems like i built my blaster for those tracks it gets to stretch and use every gear if you ever come to MN pm me, i use 13/40 for tracks
Similar threads
