cpi pipe

[chuck_norris]

does anyone have a cpi pipe on their blaster. if so, how does it compare to a toomey or maybe a dynoport. if you have one. i would like a sond clip please.

thanks

 

[blasterdude14]

if im correct the cpi pipe is one of the pipes made by power pros. its a great all around pipe good for power in the low mid and top range. works well with stock or modded motors

 

[Blasterdude27]

if im correct the cpi pipe is one of the pipes made by power pros. its a great all around pipe good for power in the low mid and top range. works well with stock or modded motors

No cpi is its own pipe. They look like a cross between a toomey and a vitos. Some peeps will swear by them.

 

[burnin'_oil_2001]

I am going to get one next year. I spoke with the guy who designed them and he said that they did not go for top-end like they did with their banshee pipes. It is more of an all around pipe. He also said that when they were designed and tested they out preformed the Toomey (especially on modified engines) and and showed very well against other designs. They make a small bore and large bore pipe even though the large bore is not listed on their site- you just have to ask and is the same price.

 

[chuck_norris]

would a large bore work with stock bore incase i decided to get a bb kit?

 

[blasterdude14]

would a large bore work with stock bore incase i decided to get a bb kit?

dont see why not. all the large bore thing means is that it will work better with a larger bore. you could use it on a stock bore but wont get the same results

 

[4cfed]

would a large bore work with stock bore incase i decided to get a bb kit?

yes but you will prob loose some power somewhere in the power range.. prob loose some low end due to the size of the pipe

 

[yzrider]

just get a stock bore.... if you get a bigger bore the worst that could happen is thatyou loose a little top end if i'm correct.

 

[chuck_norris]

does anyone have a sound clip of wone though

 

[blasterdude14]

does anyone have a sound clip of wone though

check youtube you could probably find one somewhere

 

[Blasterdude27]

Good luck! there as rare as dynoport twin pipes ( not the 2-1 pipe!! ) are for shee's.

 

[Blasterdude27]

In this thread you can see some pics of the cpi by yfz450bence. Very sexy pipe.
http://www.blasterforum.com/engine-13/fmf-pipe-silencer-upgrade-15401/

 

[chuck_norris]

sure looks nice. whAT was the first pic a comparison of though

 

[Blasterdude27]

That was an fmf fatty.

 

[MXsandracer]

from the website:
"Our blaster pipe works well on stock motors and is a must for a modified engine. It was designed specifically for modified engines. This pipes provides excellent top end and an incredible hit in the mid-range. It is a great pipe to use for racing applications."
http://www.cpiracing.com/Products/Yamaha ATV/YBL200/Default.aspx

 

[chuck_norris]

cpi on left or right?

 

[Blasterb0y794]

cpi on left or right?

It says right there, its on the left.