Complete seal kit, where are they located?

[lassek]

Hi all.
I have ordered a complete seal kit from Vito´s ...

It looks like there are 7 seals..

2 Crank seals
1 Gearshifter seal
1 clutch seal
1 seal at the primary front sprocket..
1 ?
1 ?

Please help me refresh my memory where the last ones are supposed to be located..

thanks

 

[DUALSTROKE]

There is one for the clutch push rod also.I believe the other you do not need as it is made to accomodate the dt200 engine also.Which is where the #7 would go.

 

[pittboss45]

There is a seal for the kick start, at least the ones we sell have one.

 

[6mmedic]

Doesnt one go around the oil pump shaft?

 

[98blaster]

i just rebuilt my engine and used the same 7 peice seal kit and you get seals for
2-crankshaft
1-sprocket shaft
1-shift shaft
1-kick start
1-clutch release lever
1-oil pump shaft
and if you've done an oil block off kit (strongly recommended) than you wont need the oil pump seal

 

[lassek]

Well i did the oil block off by removing the white plastic gear.. so it no longer turns.. but is is still mounted on the motor.. so i guess i can change the seal anyway?

 

[98blaster]

Well i did the oil block off by removing the white plastic gear.. so it no longer turns.. but is is still mounted on the motor.. so i guess i can change the seal anyway?

why wouldnt you just buy a block off kit for like the 20$ it cost to do it right the first time