will 400ex a-arms work on the blaster?
im sure this has been gone over.. i googled it and found little/
im sure this has been gone over.. i googled it and found little/
compatable a-arms
- Thread starter Boostfed
- Start date
cut off the old tabs and weld on new ones.
Only problem I see with that is moving them too far forward or backward and screwing up the geometry.
The easiest would probably be banshee arms, but you would still need to cut and grind. Also they aren't much longer so to get any real width you would need a/m arms and if you spend that much you may as well buy blaster arms.
Only problem I see with that is moving them too far forward or backward and screwing up the geometry.
The easiest would probably be banshee arms, but you would still need to cut and grind. Also they aren't much longer so to get any real width you would need a/m arms and if you spend that much you may as well buy blaster arms.
o know there is a converion for 300ex's to run 400ex arms, so you could surely make one for a blaster, i am making this my next dream project!
