Clutch replaced, order?

[Herpderplol]

Hi, i ordered a new clutch and i recently got it, but i'm not sure which order it goes in, i know friction plate/plate/friction plate etc.
BUT at what point do i place the wavy octagonal disc? i looked it up to be some sort of spring, what i found was friction/plate/spring/friction/plate/friction etc. so any help would be great thanks 8-|

 

[blasterBruce]

Here ya go !

http://www.blasterforum.com/engine-13/blaster-clutch-assembly-vid-42901/

 

[scotj77]

some put it 3rd from the front, some put it 3rd from the back. doesn't matter. works either way. just make sure you space the tabs on the steels equally. they space out on 2hr intervals on a clock face 2oclock 4 oclock 6oclock........ but a little shy of a full 2 hrs works best. hope this makes sence

 

[Herpderplol]

wow your fast (O_O)
i will watch it thanks

 

[sporty982000]

Make sure when use use that wavy ring, that the fiber is the one being used in not as wide as the others. you dont want it actually touching the fiber.

Sporty

 

[Herpderplol]

Thanks to all that replied, i will go straighten up my clutch so it's right

 

[Herpderplol]

New dilema, I have a nut that a washer is attached to, the video didn't show any like that, here is picture of it, it goes on the push rod somewhere, I'm guessing it's the one that goes on the end of rod after ajusting but this washer is much bigger than video's one

 

[blasterBruce]

Your ball is welded to one push rod , you will need a new one , That nut might be the wrong one for the job

 

[Blaaster]

Do my eyes decieve me or is the ball welded to the long pushrod?

It don't look real healthy to me, looks flat on the end.

EDIT: Rotten slow satellite connection make me look like a fool often, or Bruce is a speed typer.

 

[Herpderplol]

I will pick up the new rod/ball the nut in the picture came off the push rod (my brother took it apart he has to do everything and it makes me mad) so idk how it goes and he never looks at things, just wrecks them

 

[Herpderplol]

Does anyone know what to do about the nut in the picture? We ordered a new rod/ball on Thursday I think