clutch push lever help please!!!

[johns781]

have 2002 200, having a problem with my clutch family member rebuilt bottom end. put rest together myself. goes in gear but when i pull in clutch lever does not go into neutral or do anything, i think has something to do with the push lever. any help would be greatly appreciated

 

[Iceman72]

make sure the lil' ball bearing is in there,that bugguer will cause you all kinds of grief.

 

[shadetreeatv]

yep thats what i was going to say 2 i did mine last year and forgot it an.. what no cluch gears where tight and would not shift so def cheak that

 

[fsuroxu]

Make sure the pointer tab on the actuator lever is pointing to the mark on the crankcase. It could be out of adjustment. Check the length of the clutch cable also. Could be stretched out. Also, do you have the clutch cable holder on the jug base nut? Could be several things. Good luck with it.

 

[Whitty21]

don't let family members work on your bike , but all the above suggestions ,make sense

 

[johns781]

thank all you guys...think i got it all straightend out push rod and lock nut were stripped, took off spare motor. have to tourqe down and locktight tomorro, goes into neutral now clutch lever feels good, but kept cable on while ajusting, will that really cause problems? feels fine now with engine off.

 

[DUALSTROKE]

Boston Represent.lol You should be fine.If it feels good now and you still have some adjustment at the lever you should be fine.Take it for a rip and let us know.