clutch help

[mimjurray]

i have an 06 blaster. when i pull the clutch it feels like its working. also the clutch cable moves. when im in gear and pull in the clutch it remains in gear, and i cant push it. it happened just after a light ride. i have called around and no one seems to be able to clue me in on what it could be. any help would be greatly appreciated.

 

[Unstock240]

Does the clutch basket open up when you pull the lever? When you hold the lever in you should be able to spin the inner basket freely. Then refer to this manual about push rod adjustment http://www.rydindirty.com/blastermanual.pdf

 

[DUALSTROKE]

Does the clutch basket open up when you pull the lever? When you hold the lever in you should be able to spin the inner basket freely. Then refer to this manual about push rod adjustment http://www.rydindirty.com/blastermanual.pdf

Exactly what he said.Also get some cable lube probably not the problem but does help alot.

 

[visipe]

yeah im kinda haveing teh same prob its just that sometimes it wount shift like the shift fork or wtv gets liek stuck or something

 

[blasterman87]

is it just when its not running? if so then thats normal, visipe is that your blaster in your pic ? whats the details on that beast?

 

[jtraptor660]

your clutch seems like its not disengaging. what oil are you running? push rod and other adjustments might be needed.

 

[tsufilmz]

you might even need new plates

 

[The Ox]

Could be the ball in between the push rods starting to take a crap and binding in there..

 

[blasterman87]

ox! yfz 450's wash up on the beach!!!?? i gotta go to the beach..lol

 

[stnditup2]

had kinda the same problem but it was hard for me to get into and outta gears and it was a 3 sec. fix all it was is the rod on the left side where your clutch cable connects to was sittin up to high so i pushed it down and works like a dream.....Try that and see if that makes a difference.....