Clutch Assembley

[daulton_w]

Doe's anyone know how to assemble a clutch? Or know a guide that could help me?

 

[Adaptel]

It is pretty simple. Use the following diagram from the parts manual, but the only thing that is confusing is part numbers 3,4,9,10. Yours may or may not have all of these parts. Some clutches are comprised of only two different types of rings that make up the "clutch sandwich". No matter what--Make sure you alternate using a metal disc (aka "friction plate" - has teeth to grab on the inside of the clutch basket) then follow with a composite material disc (aka clutch plate - which locks into the outside of the basket). and alternate so every clutch plate is only touching a friction plate and vice-versa.

1996 YFS200H-MNH - BLASTER Yamaha ATV CLUTCH Diagram and Parts

 

[PikledBeats]

Here is a full write-up I did on clutch placement, there is a link in the first paragraph to any more info you could possibly need

http://www.blasterforum.com/engine-13/clutch-plate-placement-write-up-39725/