i am changing my back bearings and i tock of the hub and the brake disc also the 2 screws on the axle but the sprockt dosent want to come of so i cant change them i was wonderig if there is something that i still need to unscrew or take off to get to the bearings
changing bearings
- Thread starter Blaster-Power
- Start date
Yup that axle has to come out.
PB blaster, often, and maybe a little heat will help that frozen part come loose.
I had a rigged up puller and heated it to dull red and it still didn't budge X(, got a great deal on complete axle/carrier so there it sits. 
I've seen where some have had to destroy the hub to get it off.
When you put it together put a grease zerk in the carrier and put anti seize (or at least grease) on the splines and where spacer tube goes on axle between bearings. I:I
I've seen where some have had to destroy the hub to get it off. When you put it together put a grease zerk in the carrier and put anti seize (or at least grease) on the splines and where spacer tube goes on axle between bearings. I:I
Time, patience and a little sweet oil ( in this case a FBH ) can skin any cat.
If all else fails, give up, cut it off.
pb blaster if fhat doesnt work beat the living s... out of it with a slege hamer if that doesent work cut it off
Similar threads
