Chain

Status
Not open for further replies.

sicivicdude

Member
Apr 7, 2010
6,172
162
99
North Carolina
I'm looking for someone who has a decent chain (stock length is fine) who maybe traded to a +4 swingarm but the old chain is in great shape who would like to (basically) donate it to my dragger build. I'm going with a crazy long swingarm and I'll need like a 220 link chain if I buy a new one and that'll run me into the poor house :( I figure if someone has a decent stock length chain I can re-pin that to my current stock length chain to have enough to run.
 
I mite have one for you, replacing the chains on my blasty and my boyfriends soon, I gotta figure out how to replace front sprocket and rear sprocket too, front wont be hard but not sure bout rear yet..... If u want some pic, I can send some to your email, just shoot me a pm
 
@civic: I think I got one for ya Civic, lemme check when I get home...

@Sonia: No prob girl, just pull the master link off the chain, get it outta there, pull the left rear wheel, hub, etc, unbolt the rear sprocket from the hub and slide the sprocket off, leaving the sprocket hub on the axle, very easy. If you want to remove the sprocket hub too remove the 2 large locking nuts on the axle, then the hub will come off, to the left, with some tapping/wd40, etc. Front sprocket comes right off as well from 2 bolts, real simple.
 
Last edited:
Sorry Civic, think it went with my stock swinger and brake, was not sure but double checked last night, oh wellz, good luck...
 
whew! I NEED the chain too, I'm going to start fabbing my swingarm soon and need to go ahead and get the finished chain length in my mind so I don't make the swing arm too loose or too tight to fit a chain on it LOL.

Thanks, I'll dance at your wedding!
 
Last edited:
LOL alrighty then! Il be sure if I ever happen to get married to find a place near you, so you can bust out your moves! :D

Il try and get chain to you asap buddy :) Il pm you when its ready to get your addy info
 
Status
Not open for further replies.