Carburetor question

[dustin7021]

I have a 99 blaster that still has the stock 26mm carb and i was wondering what the 2 prong plug does and if i bought a larger carb that didnt have the plug on it would it have to be bypassed or just left disconnected ...i dont have the service manuel yet, thanks

 

[ron89]

if you get a bigger carb it will work, but if you didnt disconnect the TORS i would go a head and do so ..

 

[dustin7021]

ya i just looked up the tors sh*t on the forum and mine has a symptom mentioned so im gonna take that thing off...thanks for the info

 

[Lindso]

I'm lookin to purchase a 30mm-32mm carburetor. Other than the projectblaster.com website, where else can I find a good carb in this size range?

 

[dustin7021]

Yamaha ATV Yamaha Blaster Parts and Accessories Buyers Guide

check them out for carbs....they have some videos of there project blaster..

 

[Lindso]

Anyone familiar with this brand? eBay Motors: 30MM D slide Carb for Yamaha Blaster (item 230307431132 end time Nov-16-08 06:42:07 PST)

 

[dustin7021]

Anyone familiar with this brand? eBay Motors: 30MM D slide Carb for Yamaha Blaster (item 230307431132 end time Nov-16-08 06:42:07 PST)

check this website out.... cpw is a distributor Carburetor Parts Warehouse

 

[Lindso]

Hey buddy thanks for posting these links for me

 

[hickskateboarder]

if ur planning on port and polish you may want to just go with a 34 to begin with. you can get a used 250r carb pretty cheap, but don't get one from before....i think like 86? maybe cuase they're smaller i think... . . search on the forum i nkow there's posts on here about 250r carbs somewhere. or if ya wanna go even bigger i hear a 36mm off a yz125 (i think) works pretty good too