CARB???

[j carey]

thinking of putting a 30 mm OKO carb on a slightly modded blaster WHAT DO YOU GUYS THINK???THIS MOD WILL COST ME ABOUT 160.00 CANADIAN!

 

[2smoker85]

go with it,what mods so far?

 

[j carey]

4mm crank,reeds,fmf fatties

 

[2smoker85]

yeah get a 30mm you will be good, you can get the boots off of ebay, just look up 30mm carb boot or intake boot

 

[mr_3_0_5]

you can use your stock boot..

 

[2smoker85]

not from the airbox, it def won't fit. you gotta be a f*cking magician to get that sh*t on there!

 

[blasterfreek30]

try shaving a little out of the boot, its only 4 mm bigger than stock

 

[2smoker85]

thats quite a diff, i am sure it can be done but you will be messing with it for awhile,lol

 

[specialized7]

lol i got my 35mm today didnt know it would be so big can almost stuff my fist in there lol jk

 

[hatcher_matt]

I have an OKO 30mm and it fits my stock boot the outside of the housing isn't much diffrent the bore of the inside of the carb is larger. I know I run all stock air box and boots

 

[coreyownz]

yo specailized all kinds of sh*t to the motor with a stock pipe... wtf haha

 

[FLOTEK]

yo u can even get a 35mm keihin pwk to fit i n the stock intake manifold ,often where theres a will ..theres a way

 

[coreyownz]

how bout with my fmf fattty port and polish milled head and vforce 3's can i 30mm good size for me?

 

[blasterfreek30]

yo u can even get a 35mm keihin pwk to fit i n the stock intake manifold ,often where theres a will ..theres a way

i got my 34mm to fit in the stock boot before i modded the airbox

 

[2smoker85]

yo u can even get a 35mm keihin pwk to fit i n the stock intake manifold ,often where theres a will ..theres a way

man i tried to get my 34 in the stock boot, there was NO WAY that sh*t was going over the hole, that sh*t is ginormous, i would have to see someone do it to believe it!