carb size
- Thread starter yamaha01
- Start date
Sure. It probably wont fit your stock intake boot though. Youll have to get a different intake manifold, and youll have to modify your intake boot to fit (stock carb is a 26mm)
Im running a 28 mil PWK and I had to get a different intake mani and modify my stock boot.
Im running a 28 mil PWK and I had to get a different intake mani and modify my stock boot.
you can modify the manifold too. if you have a dremel or a drill with a drum sander. just hollow it out slowly until it fits. what kind of carb is it?
yeah that will work fine on a blaster. you will need some engine mods to really get much added power out of it though
my 30mm mikuni fits in my stock manifold just fine, i just ordered a k&n to run out back when i got it, it'd be fine if i rode dry stuff only, even with a outwear i regret it, time to go to an aftermarket airbox
i have a 30mm oko and didnt have to modify anything. just a little tight fit... just how i like it!!
That's odd Luni, I just ran my stock manifold for the PWK28. I did cutoff the rubber bumps up top so I could rotate it just enough to clear the clutch lever tho.
I was making an assumption, guess I was wrong. Thats cool.
I know the 28 you sent me works with the intake manifold you sent me, so I assumed it was not a stocker.
I know the 28 you sent me works with the intake manifold you sent me, so I assumed it was not a stocker.
