I am working on a blaster project almost have done has a 240 vitos kit ,stroker crank etc. full b1 pipe and silencer v force 4 reed valve system can any body tell me carb size and jetting i should use
If it were mine, I would put on a UPP intake, Keihin 35mm PWK, and a K&N pod filter with an outerwear. If you ride in soupy slimey mud, you may want to go a different route on the filter.
If it were mine, I would put on a UPP intake, Keihin 35mm PWK, and a K&N pod filter with an outerwear. If you ride in soupy slimey mud, you may want to go a different route on the filter.
No such thing as a 34 PWK. 33 or 35 are your only choices in that range. Externally they are the same. Neither will fit a stock intake. You need an aftermarket intake. I prefer the UPP. You will need a TORS delete cable. As far as air filter, you need something that fits these carbs. It will be quite a bit bigger than stock.
No such thing as a 34 PWK. 33 or 35 are your only choices in that range. Externally they are the same. Neither will fit a stock intake. You need an aftermarket intake. I prefer the UPP. You will need a TORS delete cable. As far as air filter, you need something that fits these carbs. It will be quite a bit bigger than stock.