my 02 blaster has the self mixing system with the oil tank in the back and the lines run to the oil pump and back to the carb. is there a way to block that off and mix it myself or would the line running to the carb mess it up?
carb question for 02 blaster
- Thread starter 2strokesnsnuff
- Start date
Sure is it is called an oil injection deletion kit or you make one yourself. Go to the DIY section and search for oil injection removal or oil injection deletion kits. You should find everything you are looking for.......
this has been covered 100000000000000000000000000000000000 times
you can get a kit from vito's to remove it, basically you just remove the lines, tank, and pump and put in a small block off plate where the pump used to be. then you simply plug the port on the carb where the oil line used to go
you can get a kit from vito's to remove it, basically you just remove the lines, tank, and pump and put in a small block off plate where the pump used to be. then you simply plug the port on the carb where the oil line used to go
So does anybody know what to use to get that cakey whit crap out of the bowl of my carb? B12 didn't do it.
try some chem dip from an auto parts store, i use this to clean my carbs. It takes everything off, if not then its really easy to get off from there.
