Below are my mods. I'm ordering a 35mm Keihin Air stryike carb.
I'm at 500 ft elevation.
If I need new needles, jets, etc, I'd like to order them the same time as the
carb.
The carb comes with
Main jet 160
Slow jet 48
Needle 48 DEK
Throttle valve 4.5
Do these sound reasonable? Or should I order others along with the new carb?
Mods
Vito's 240 big bore
Ken O'Connor port on the cylinder
Ken O'Connor rechambered head
Vito's +3m stroker crank
Vito's Fat Bastard pipe
175psi compression
50/50 pump gas and VP 110 race fuel
Lightened flywheel
Lightened counter balance
Crank trued
Shift star mod
UPP 35mm intake
35mm Keihin PWK Air striker carb
V Force IV reeds
CFM airbox. UNI filter
Driveline performance clutch disks and springs
I'm at 500 ft elevation.
If I need new needles, jets, etc, I'd like to order them the same time as the
carb.
The carb comes with
Main jet 160
Slow jet 48
Needle 48 DEK
Throttle valve 4.5
Do these sound reasonable? Or should I order others along with the new carb?
Mods
Vito's 240 big bore
Ken O'Connor port on the cylinder
Ken O'Connor rechambered head
Vito's +3m stroker crank
Vito's Fat Bastard pipe
175psi compression
50/50 pump gas and VP 110 race fuel
Lightened flywheel
Lightened counter balance
Crank trued
Shift star mod
UPP 35mm intake
35mm Keihin PWK Air striker carb
V Force IV reeds
CFM airbox. UNI filter
Driveline performance clutch disks and springs
