can i just put a 240 slleave into astock jug

[03blasteryfs03]

just waondering and put the 240 piston 2

 

[Jay]

Re: can i just put a 240 slleave into a stock jug

just wondering and put the 240 piston 2

No you can't you have to send it out to have it resleeved an the head needs to be done to work with the piston. go on vito's web page they do the resleeve an there builders on here that would do it to.

 

[03blasteryfs03]

wow your blaster is the exat same ting as mine no joke lights and every thing wow but any ways my freind ownes the crank shop up here in vt so ya but r the ports in the 240 sleeve the same as a stock one

 

[Jay]

Re: can i just put a 240 slleave into a stock jug

wow your blaster is the exact same ting as mine no joke lights and every thing wow but any ways my friend owns the crank shop up here in vt so ya but r the ports in the 240 sleeve the same as a stock one

I don't know about that .they should be,for the money that you will end up spending on resleeving you are better off getting the vito's 240 kit

 

[06kid]

if you resleave you stock jug i would recomend redoing the bottom end as well put a hotrod crank in it or a +3mm strocker with the strocker you would have to get a base gasket from vito's or trench your cases you dont have to just would ad more power

 

[jfblasterboy65]

you can have it done kennedy is doing one for me and its cheaper then the vitos kit and hes redoing my head as well as porting it to match my riding style

 

[03blasteryfs03]

ya it have a brand new everything motor