camber problems

[samolia]

ok i have a 1993 blaster completely stock.
ok so my problem is that my camber is off it seams like one side has positve camber and the other side has negative camber so my wheels are like this

/O/
pretend the circle is my quad and the lines are my tires
so i was wondering is there any way i can adjust my camber?

 

[djack12]

yes change the adjustment with the tie rods. thats why they are threaded. one is gonna be standard thread, and the other is going to be reverse thread. hopw this helps.

 

[wrench man]

yes change the adjustment with the tie rods. thats why they are threaded. one is gonna be standard thread, and the other is going to be reverse thread. hopw this helps.

WHAT!? are you SMOKING!!!!

The tie rods adjust the TOE ONLY!, something is bent! if they are leaned the same way! squat down in front and LOOK at the frame REALLY close.

 

[samolia]

heres a pic of it if you notice anything thing bent plz let me know

 

[djack12]

WHAT!? are you SMOKING!!!!

The tie rods adjust the TOE ONLY!, something is bent! if they are leaned the same way! squat down in front and LOOK at the frame REALLY close.

sorry thats what i was thinking...my fault.

 

[245stroker]

I had that problem on my old blaster, turned out one of the spindles was bent from laying it on its side, you might have the same problem

 

[samolia]

I had that problem on my old blaster, turned out one of the spindles was bent from laying it on its side, you might have the same problem

that might be something cause i couldnt find anything really wrong with the frame i even had a tape measure out there and both sides matched so ill have to look into that spindle stuff.
also if anyone could send me a picture of a good blaster frame that would be very helpful so i can compare it to mine.

thanks for all the help so far everyone!