I checked all air pressure yesterday and its good. Also put 2 spindles on it,no change in camber on left front.
camber on 2002
- Thread starter dlporkchop
- Start date
the spindles attach to the ball joints the only way i can see that your camber would be off is by having a bad ball joint, they cant be replaced on stock a-arms.
I only rode my 2004 for about 18 months, ball joints feel good. I am going to take my other 2002 left front which is straight and try that. I will try to get a pic. When I say camber is out, I mean really out. Just seems like I could see something visible or feel something? Haven't turned bike on rear yet, will swap parts & look at bottom tomorrow, raining hard today & garage full of atvs,bikes & car. Thanks
Sounds like it could be a bent frame from what you describe. Best way to check is to compare the frame tubes where it gets wider on the bottom like awk said. You could also try looking at the front of the bike from the side and seeing if it looks like one tire sticks out farther than the other. Bends in the frame at that spot up front also tend to make one tire sit back a little farther than the other one.
